Wolf Warrior Technology ZL-WYTY Single Channel Intelligent Remote Control Switch Manual

◆Applicable scenarios

This product is suitable for remote control switches, anti-theft alarm systems, electric doors and windows, lighting fixtures, motor oil pumps, electrical equipment, various industrial signal controls, lifting equipment, and more. It involves various civilian and industrial product fields and has a wide range of usage space.

◆Parameter Specifications

Working voltage: DC5-30 volts Wide voltage Load power: Resistive load less than 8A, capacitive and inductive load less than 4A

Output method: A set of normally open signal outputs (can be changed by setting the power on state)

Reception frequency: 315MHz/433MHz, etc. Optional reception sensitivity: -105db

Control methods: mobile app control+smart speaker voice control+manual control+wireless remote control, etc. When there is no wifi signal, Bluetooth control can be used on the mobile phone

Working modes: jog, self-locking, delay, timing, scene control, etc

WiFi frequency: 2.4G Size: 28 * 45 * 70mm

◆switchCode pairing with WIFI

• Connect your phone to 4G WiFi, turn on your phone's Bluetooth, download the "Graffiti Smart" app or graffiti related app software, and register an account
• Place the controller close to the router (the closer it is, the better the code matching), connect the power, and the controller's green light will flash rapidly (at this point, it has entered the fast code matching state)
• Open the Graffiti app, click on "Add Device", and enter the add interface. There are two ways to add this product
• Power on quick code matching: When the controller is powered on, the green light flashes rapidly. Above the "Add Device" interface, there is an automatic device search function. When you see that a new device has been found, click "Add", follow the steps inside, enter your WiFi account and password, click "Next", and wait for the successful addition.

• Manual control to add code: In the "Add Device" interface, select "Electrician" - "Power Breaker" in "Manual Add", click "Power Breaker (Bluetooth+Wi Fi)", follow the prompts above: Long press the manual control button for about 5 seconds, confirm the flashing status of the indicator light, enter the WIFI account and password, click Next, and wait for the successful addition.

◆Switch andRemote control code matching

This product can be paired with fixed code and learning code remote controls, with fixed code remote controls such as the 3M3 PT2264 chip being the best; For learning code remote controllers such as EV1527 chips, the best oscillating resistor is 300K. If the oscillation resistance deviation is too large, it will cause the inability to learn pairing.

Enter the product control interface, click on "Settings" in the bottom right corner, select "RF Remote Control Settings", click "Add", the controller's green light will flash, press the remote control within 10 seconds, and if successful, the interface will display "Remote Control". You can set the functions of this input button on the remote control: turn off, turn on, and switch states (turn off: can only turn off, cannot turn on; turn on: can only turn on, cannot turn off; state switch: press once to turn on, then press again to turn off)

◆switchworking mode

  In the bottom left corner of the product control interface, click "Timer" to set various working modes. The product defaults to self-locking mode: press once to turn on, then press again to turn off.

In the upper right corner of the control interface, click on an angled brush icon to see the device information and intelligent scene control mode of the product. This requires setting up with other connected apps, such as the Xiaodu Smart Speaker app, Tmall Genie app, etc. For specific operations, please follow the steps introduced in other apps.

◆Structural wiring diagram

Buttons: manual control and code matching buttons

Lamp: Signal indicator light

IN+positive pole: power supply positive input terminal

IN - Negative pole: Negative input terminal of power supply

Public COM: Public End Output

Normally open NO: Constant start output

Positive pole+: Connected to the common COM terminal, it can output a positive signal from the beginning; Can also be used as a power input terminal

Negative pole - Connected to the common COM terminal, it can output a negative pole signal from the beginning; Can also be used as a power input terminal

Both sides of the switch are designed with power input ports, which can be selected according to the usage environment to input on one side, output on the other side, or single-sided input/output wiring.

The common COM and normally open NO ports form a set of normally open signal outputs, which are commonly used to control the on/off of a line, such as controlling buttons. If it is necessary to control the positive output, connect the positive+and common COM with a wire. The normally open NO output is the positive signal, which is generally used to control the power on/off of devices such as LED lights, motors, etc. If it is necessary to control the negative output, connect the negative terminal to the common COM wire. The normally open NO output is the negative signal, which is generally used to control the power supply motherboard of the electronic lock and achieve door opening and closing. For example:

Attention: WiFi pairing can be done directly by pressing the large button on the switch panel. To connect the wires, use a screwdriver to gently pry off the two ends of the housing to open the housing. Wiring can be done through the screw holes in the middle transparent layer without opening the transparent layer.