12Fumen BansmallSingle channel remote control switch ZL-PXMJInstruction Manual

◆Applicable scenarios

This product is suitable for remote control switches, access control, anti-theft alarm systems, automotive electronics, electric doors and windows, lighting fixtures, electric motors and water pumps, various industrial signal controls, lifting equipment, and more. It involves various civilian and industrial product fields and has a wide range of usage space.

◆Parameter Specifications

Working voltage: DC12V

Load power: Resistive load less than 8A, capacitive and inductive load less than 4A

Working mode: 7 modes including 3 seconds delay, 5 seconds delay, 10 seconds delay, 30 seconds delay, etc

Output mode: Can be dry contact output, can also control power output

Receiving frequency: 315MHz/433MHz Receiving sensitivity: -108db Size: 25 * 37 * m41m

◆Instructions for Use：

1. Code and clear code:

1) Clear code: Press the code button 8 times in a row (the light will turn on once each time), and the indicator light will flash quickly to clear the code.

2) Code pairing: The controller has 7 working modes: jog two key interlock self-locking delay of 3 seconds, delay of 5 seconds, delay of 10 seconds, and delay of 30 seconds. In this order, press the code pairing button once to release it, indicating the selection of jog mode, and then press the remote control to learn code pairing; Press and release twice to select the two key interlock mode (note: in interlock mode, you need to learn two keys, one on and one off); and so on.

3) 7 working modes can exist simultaneously, switch at any time, and correspond to corresponding functions by learning different buttons or remote controls.

2. Working method introduction: For example, control the light: jog - press and hold the button, the light will turn on, release the hand light will turn off; Two key interlock - press the A key to turn on the light, press the B key to turn off the light; Self locking - Press the button once to turn on the light, press it again to turn off the light; Delay for 3 seconds: Press the A key once and the light will turn on. After 3 seconds, the light will automatically turn off.

◆Matching remote control

 This product can be paired with fixed code and learning code remote controls.

The chips of the fixed code remote control include PT2262, PT2264, PT2260, SCT2260, HS2260, etc. Taking PT2262 as an example, the oscillation resistor ranges from 1.8M ohms to 4.7M ohms, with 3.3M ohms being the best.

The chips of the learning code remote control, such as EV1527, SCL1527, HS1527, HS2240, etc., have oscillating resistors such as EV1527. Taking 200K ohm-390K ohm as an example, 300K ohm is the best

◆Functional Description of Wiring Ports

  Input:Positive+: positive input negative -: negative input

  output: NO is a normally open terminal, COM is a common terminal, NC is a normally closed terminal

Under normal circumstances, the COM end is connected to the NC end. After pressing the remote control, the COM end is disconnected from the NC end and connected to the NO end, achieving an on and off function.

For example, to control a 12V LED light, the wiring can be done as follows: connect the 12V power supply to the positive+and COM terminals, connect the negative terminal to the negative - and the negative terminal of the LED light, and connect the NO terminal to the positive terminal of the LED light (to control the positive output)