wideVoltage ACSingle channel remote control switch ZL-RF-A1KInstruction Manual

◆Applicable scenarios

This product is suitable for remote control switches, security alarms, electric doors and windows, lighting fixtures, electric motors and water pumps, etc. It involves various civilian and industrial product fields and has a wide range of usage space.

◆Parameter Specifications

Working voltage: AC 85-240 volts

Load power: Resistive load less than 8A, capacitive and inductive load less than 4A

Working mode: 7 modes including 3 seconds delay, 5 seconds delay, 10 seconds delay, 30 seconds delay, etc

Output mode: active output

Reception frequency: 433MHz Reception sensitivity: -109db Size: 23 * 42 * 47mm

◆Instructions for Use：

1. Code and clear code:

1) Clear code: Press the code button 8 times in a row (the light will turn on once each time), and the indicator light will flash quickly to clear the code.

2) Code pairing: The controller has 7 working modes: jog two key interlock self-locking delay of 3 seconds, delay of 5 seconds, delay of 10 seconds, and delay of 30 seconds. In this order, press the code pairing button once to release it, indicating the selection of jog mode, and then press the remote control to learn code pairing; Press and release twice to select the two key interlock mode (note: in interlock mode, you need to learn two keys, one on and one off); and so on.

3) 7 working modes can exist simultaneously, switch at any time, and correspond to corresponding functions by learning different buttons or remote controls.

2. Working method introduction: For example, control the light: jog - press and hold the button, the light will turn on, release the hand light will turn off; Two key interlock - press the A key to turn on the light, press the B key to turn off the light; Self locking - Press the button once to turn on the light, press it again to turn off the light; Delay for 3 seconds: Press the A key once and the light will turn on. After 3 seconds, the light will automatically turn off.

◆Matching remote control

 This product can be paired with fixed code and learning code remote controls.

The chips of the fixed code remote control include PT2262, PT2264, PT2260, SCT2260, HS2260, etc. Taking PT2262 as an example, the oscillation resistor ranges from 1.8M ohms to 4.7M ohms, with 3.3M ohms being the best.

The chips of the learning code remote control, such as EV1527, SCL1527, HS1527, HS2240, etc., have oscillating resistors such as EV1527. Taking 200K ohm-390K ohm as an example, 300K ohm is the best

◆wiringimageInstructions